The IE5G_SS, based on the DSP and FPGA is now available in two versions: single camera input and dual camera input, and is able to generate many images simultaneously from one scanned object. The board is compatible with BAPis cameras with a native, low-cost G-Link interface and third-party cameras. Interface extension boards are available upon request (Camera Link, CoaXPress, and others). The default input interface is the internal BAPis camera interface (G-Link). It requires a generic, low-cost Ethernet Cat-7 cable for video transmission and control commands between the IE5G_SS board and any BAPis camera. The processed images are sent to the host through a USB 3.0 Super Speed interface. MS Windows drivers are supported. Optionally, BAPis can provide drivers to other operating systems. The IE5G_SS can be installed as an embedded system in any device, which has to perform complicated image processing functions in a limited timeframe.
The IE5G_SS was designed to work with digital color cameras from BAPis and third party cameras. With a performance of 600 PPM (1200 IPM) 300 DPI DIN A4 simplex dual-stream (JPEG color + T6 bi-tonal). The IE5G_SS can be used in high-speed duplex color scanners.
The IE5G_SS board has plenty of additional image processing functions. For example: compressions, image enhancement, Color Correction Matrix for perfect color matching, advenced color filters, advanced asymmetric image sharpening, color saturation control filter, color decorrelation, barcode and mark recognition and others.
Technical description:
-
Based on a high performance TI Keystone TMS320C6671 DSP and Xilinx family 7 FPGA
-
5 Gbps USB 3.0 Super Speed host interface replacing 480 Mbps USB 2.0 High Speed interface
-
On board memory: 1600 MHz DDR3
-
Up to 24-bit color in 120 MHz per camera native video interface
-
Two independent 10 Gbps interface connectors for future customizable video codecs or video input modules (Camera Link, CXP, etc.)
-
Two board versions available: single camera input and dual camera input
-
Up to 4 GB SDRAM
-
8x RS232 interfaces for camera and transporter control
-
Image multistreaming (color + bi-tonal output from the same source document), up to 64 output windows available
-
Flexible image output image formats: color/grayscale JPEG, JPEG2000, TIFF grayscale, TIFF color uncompressed, TIFF bi-tonal with and without CCITT T6 compression
-
USB driver and DLL for MS Windows (32-bit and 64-bit) and Linux
Advantages:
-
Suitable for high speed scanners
-
Simplex (one camera) or duplex (two camera) modes available
-
Reduced electromagnetic interface emission design
-
Software customization available
-
Up to 600 pages per minute DIN A4/300 DPI simplex, multi-stream (dual output TIFF G4 and color JPEG).
-
Automatic black border removal
-
Automatic document skew detection and rotation correction